Description

Description

The lithium-ion battery has good safety performance and built-in overcharge protection. This type of battery has undergone thousands of repeated discharges and safety tests. The battery performance is safe and reliable.

CAUTION: The Classic battery comes in two versions: the 36V 12Ah and the 48V 10Ah. They are NOT INTERCHANGEABLE.  The 36V Classic battery goes on the Nakto Classic ebike and the 48V goes on the Nakto Classic 2 ebike. The 36V does not go on a 48V Classic 2 and the 48V does not go a 36V Classic. 

Features

• Easy to Install: Lockable and removable
• Brand: NAKTO
• Range: A fully charged battery can last up to 22 miles
• To Fully Charge: 4-6 hours

Battery General Q&A

Important things to remember:

• Nakto cannot supply duplicate keys for this battery so be careful. You may be able to have a duplicate key made at your local hardware store – do this immediately to insure you have a duplicate in case of loss.
• Nakto can supply an entire lock set which can be installed in the battery case (see video further down this page)
• When charging the battery, ALWAYS connect the battery and charger first. Then plug the charger into the wall. Not doing this can blow the battery fuse. 

How to take the battery out of the bike.

1. Flip the seat down; there is a small blue bar under the seat. Pull that bar up to remove the battery, then put the seat back.

2. While pushing the key in, turn the battery key counter-clockwise to unlock. Pull the battery out.

If the charger light is always green when charging does this indicate a battery problem?

If the light is always green when charging, this typically indicates that the fuse is bad. Replace the fuse. (see video below)

How to Replace the Battery Fuse

How to Replace the Bike Key Set

Explore more from our collection.